StoneTech Professional Epoxy Grout Haze Remover, Quart

Where to Use
Suitable for all natural stone surfaces including slate, marble, and granite. Highly porous or highly textured surfaces should be treated with DuPont™ StoneTech® Professional Grout Release before grouting to enable effective removal of epoxy grout haze.

Directions
Read entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area until foot traffic resumes. Avoid contact with surfaces not intended to be treated. Product can cause plastics (e.g., PET) to haze, and can dull linoleum surfaces. Avoid applying in direct sunlight. Should not be used in extreme temperatures. Recommended application temperature range is 50°F to 90°F.

1. SHAKE WELL BEFORE USING. Do not dilute before applying.
2. Wear rubber gloves and eye protection during handling and application to prevent skin and eye contact.
3. Liberally apply an even coat over the required area with a paint brush, mop or paint pad. DO NOT APPLY PRODUCT WITH A SPRAYER. Apply a second coat 10 minutes after the first coat to even out the thickness of the application. Immediately remove product from unintended surfaces with a wet cloth
to prevent potential damage to those surfaces.
4. Application time for epoxy grout haze: 1 to 2 hours
5. Do not let Epoxy Grout Haze Remover dry on the surface. If product starts to dry,add water to keep surface wet. Covering the area being treated with plastic can aid in removal.
6. Agitate surface with a nylon scrub brush or pad after testing a small area first to make sure that brush or pad will not scratch stone. Surface can be wet with water to enable easier removal of coating.
7. Wipe up residual coating with clean, dry cloths.
8. Rinse surface well with clean water.
9. More then one application may be required; repeat steps 3 through 8 when necessary.
10. Surface traffic may begin 2 hours after removal of coating.

Available Sizes (and Coverage)
Quart: 20–50 sq ft